sales@cnkosun.com    +86-577-88309853
Cont

Có bất kỳ câu hỏi?

+86-577-88309853

Mar 28, 2022

Giới thiệu về Hiệu suất và Nguyên lý của Bể chiết

The extraction tank is a commonly used leaching and extraction equipment in the pharmaceutical and chemical industry, and is especially suitable for the leaching and extraction of the components contained in the plant products. The structure has a tank body, a screw propeller or a propeller propeller with an axial position device in the tank body, and is connected with the rotating shaft disk outside the tank body, and it is characterized in that it has a set of continuous countercurrent leaching and extraction single tanks which are inclined horizontally, and the tank is separated from each other. The feed port is connected with the feed port to form a communication device. The upper part of the low end of each single tank has a feed port, the lower part has a residual liquid discharge port, the upper part of the high end of the tank body has a liquid inlet or exhaust port, and the lower part has an outlet port. Feed mouth.

Giới thiệu Hiệu suất

The extraction tank is a multi-purpose equipment designed for traditional Chinese medicine factories, boiling and extraction processes. It can extract, recover alcohol and separate volatile oil in this process. In addition to the main equipment of the extraction tank, this equipment is also equipped with a foam catcher, a cooler, an oil-water separator, etc. All parts of these devices in contact with drugs are made of stainless steel, and the heating interlayer is strictly tested by the pressure vessel inspection department. In the extraction process, the equipment is composed of condenser, oil-water separator, etc., and is completed in a completely sealed recyclable system, and at the same time, the organic solvent is recovered from the waste residue.

Nguyên lý chiết xuất

(1) chẳng hạn như chiết xuất nước: nước và thuốc truyền thống Trung Quốc được nạp vào bể chiết xuất, và nguồn nhiệt xen kẽ được bắt đầu. Sau khi đun sôi trong bình, việc cung cấp nguồn nhiệt bị giảm đi, và duy trì sự sôi trong bình. Thời gian duy trì được xác định theo quy trình dược lý chiết xuất. Nước, hơi nước được làm lạnh và đưa trở lại bể chiết để duy trì tuần hoàn và nhiệt độ.

(2) chẳng hạn như chiết rượu: trước tiên cho thuốc và rượu vào bồn chứa và phải được đậy kín, cung cấp cho nguồn nhiệt xen kẽ hơi, mở nước làm mát để giảm cung cấp nguồn nhiệt khi bồn đạt nhiệt độ yêu cầu, và Làm cho hơi rượu bay lên trở lại thành rượu lỏng sau khi đi qua bình ngưng Tức là để nâng cao hiệu suất, có thể dùng bơm tuần hoàn cưỡng bức để thuốc lỏng được hút ra từ phần dưới của bình qua bơm và quay trở lại bể thông qua đầu vào phía trên của xi lanh để giảm dòng chảy kênh cục bộ.

(3) Khai thác dầu: đầu tiên cho thuốc bắc và nước có chứa dầu dễ bay hơi vào thùng chiết, mở van tuần hoàn của bộ tách dầu, điều chỉnh van hồi lưu và mở nước làm mát để làm mát khi van nguồn nhiệt đạt đến. nhiệt độ bay hơi. Thuốc dạng lỏng nên được giữ ở một độ cao nhất định trong thiết bị phân tách để tách thuốc và một thiết bị tách nước - dầu khác nên được sử dụng luân phiên.

(4) Thu hồi olein: Cho rượu vào xilanh, bật nước làm mát cho hơi rồi mở van thu hồi.

 


Gửi yêu cầu